白云岩与砂岩致密储集体质量的差异性

白云岩与砂岩致密储集体质量参数为随机分布的连续谱系，孔隙结构、物理参数复杂多变，表征难度较大。基于铸体薄片、压汞、核磁共振、孔隙度和渗透率等测试技术，结合大量天然气勘探开发实际资料，采用统计分析对比方法，重点讨论了储层质量宏观与微观参数特征。结果表明，白云岩与砂岩致密储集体质量参数具有正态分布特征，是一种金字塔数据结构，常规储层比例一般为15%~20%，是砂岩或白云岩致密储层的“甜点”；致密砂岩储层微观孔隙发育，孔、喉连通性较好，分布比较均匀，储层孔、渗关系较好，表现为相对高孔和低渗；白云岩致密储层质量尽管具有孔、喉连通性差和孔、渗关系较差的不利因素，但也具有相对高渗、低束缚水饱和度、低排驱压力及裂缝网络发育等有利因素，天然气渗流能力较好，勘探开发潜力较大。我国发育碳酸盐岩沉积，应加强致密白云岩气藏成藏条件研究与勘探。     

电磁搅拌对大圆坯结晶器冶金行为影响的探讨

 为了探究结晶器电磁搅拌(M EMS)对大圆坯结晶器内综合冶金行为的影响。以大断面圆坯连铸结晶器冶金行为为研究对象，基于电磁热流体与凝固传输理论建立三维耦合数值模型。揭示大圆坯连铸常用五孔水口浇注条件下结晶器内电磁场、流场、传热与凝固等综合冶金行为，提出电磁搅拌对结晶器冶金性能影响的多参量评价方法。以中碳铬钼齿轮钢650 mm大圆坯连铸为例，指出结晶器电磁搅拌存在最佳搅拌电流，可获得相对较好的综合冶金效果。具体表现为弯月面保持一定的切向速度和过热度，有利于保护渣的熔化和夹杂物的上浮去除；液面波动幅度在控制范围内，可避免卷渣、改善表面质量；结晶器内钢液过热得到有效耗散，有利于等轴晶形核改善铸坯内部质量；侧孔出流钢液速度得到有效控制，可抑制注流对初凝坯壳的冲刷，提高了初生坯壳生长的均匀性。此外，电磁搅拌产生的水平旋流强度也可得到有效控制，有利于避免常见的皮下白亮带现象。     

A side-sensitive synthetic coefficient of variation chart

Control charts for monitoring the coefficient of variation (γ) are useful for processes with an inconsistent mean (μ) and a standard deviation (σ) which changes with μ, by monitoring the consistency in the ratio σ over μ. The synthetic-γ chart is one of the charts proposed to monitor γ, and its attractiveness lie in waiting until a second point to fall outside the control limits before a decision is made. However, existing synthetic-γ charts do not differentiate between the points falling outside the upper control limit (UCL) and lower control limit (LCL). Hence, this paper proposes a side-sensitive synthetic-γ chart, where successive nonconforming samples must either fall above the UCL or below the LCL. Formulae to compute the average run length (ARL), the standard deviation of the run length (SDRL) and expected average run length (EARL) are derived using the Markov chain approach, and the algorithms to obtain the optimal charting parameters are proposed. Subsequently, the optimal charting parameters, ARL, SDRL and EARL values for various numerical examples are shown. Comparisons show that the side-sensitive synthetic-γ chart consistently outperforms the existing synthetic-γ chart, especially for small shifts. The proposed chart also consistently outperforms the Shewhart-γ chart, while showing comparable or better performance than the Exponentially Weighted Moving Average (EWMA) chart for most shift sizes, except for very small shifts. Finally, this paper shows the implementation of the proposed chart on an industrial example.     

Hybrid Segmentation Scheme for Skin Features Extraction Using Dermoscopy Images

Objective and quantitative assessment of skin conditions is essential for cosmeceutical studies and research on skin aging and skin regeneration. Various handcraft-based image processing methods have been proposed to evaluate skin conditions objectively, but they have unavoidable disadvantages when used to analyze skin features accurately. This study proposes a hybrid segmentation scheme consisting of Deeplab v3+ with an Inception-ResNet-v2 backbone, LightGBM, and morphological processing (MP) to overcome the shortcomings of handcraft-based approaches. First, we apply Deeplab v3+ with an Inception-ResNet-v2 backbone for pixel segmentation of skin wrinkles and cells. Then, LightGBM and MP are used to enhance the pixel segmentation quality. Finally, we determine several skin features based on the results of wrinkle and cell segmentation. Our proposed segmentation scheme achieved a mean accuracy of 0.854, mean of intersection over union of 0.749, and mean boundary F1 score of 0.852, which achieved 1.1%, 6.7%, and 14.8% improvement over the panoptic-based semantic segmentation method, respectively.     

Digital image correlation strain measurement of thick adherend shear test specimen joined with an epoxy film adhesive

Structural bonding and bonded repairs of composite materials become more and more important. Understanding the strain within the bondline leads to suitable bonding design. For new design approaches the strain distribution within the bondline has to be analyzed. Thus, often finite element analysis (FE) are used. However, a huge challenge is the availability of reliable material properties for the adhesives and their validation. Previous work has shown that it is possible to measure the small displacements resulting within thin epoxy film adhesives using high resolution digital image correlation (DIC). In this work a 2D DIC setup with a high resolution consumer camera is used to visualize the strain distribution within the bondline over the length of the joint as well as over the adhesive thickness. Therefore, single lap joints with thick aluminum adherends according to ASTM D 5656 are manufactured and tested. Local 2D DIC strain measurements are performed and analyzed. Two different camera setups are used and compared. The evaluation provides reliable material data and enables a look insight the bondline. The results of the full field strain data measured with DIC are compared with numerical simulations. Thus, material models as well as chosen parameters for the adhesive are validated. Compared to extensometers, giving only point-wise information for fixed measuring points, the DIC allows a virtual point-wise inspection along the complete bondline. Furthermore, it allows measuring close to the bondline to reduce the influence of adherend deformation.     

基于文本与语义相关性分析的图像检索

为了更加有效地检索到符合用户复杂语义需求的图像，提出一种基于文本描述与语义相关性分析的图像检索算法。该方法将图像检索分为两步：基于文本语义相关性分析的图像检索和基于SIFT特征的相似图像扩展检索。根据自然语言处理技术分析得到用户文本需求中的关键词及其语义关联，在选定图像库中通过语义相关性分析得到“种子”图像；接下来在图像扩展检索中，采用基于SIFT特征的相似图像检索，利用之前得到的“种子”图像作为查询条件，在网络图像库中进行扩展检索，并在结果集上根据两次检索的图像相似度进行排序输出，最终得到更加丰富有效的图像检索结果。为了证明算法的有效性，在标准数据集Corel5K和网络数据集Deriantart8K上完成了多组实验，实验结果证明该方法能够得到较为精确地符合用户语义要求的图像检索结果，并且通过扩展算法可以得到更加丰富的检索结果。     

基于Marr小波改进的SIFT算法的遥感影像配准

〖HTH〗通讯作者〖HTSS〗:[ZK（]金〓燕(1991-)，女，山东济宁人，硕士研究生，主要从事图形图像处理，图像与视觉信息计算方面的研究。E\|mail:jyan0529@163.com。[ZK）] 〖ZW)〗〖HT〗 〖AM〗〖HT5SS〗〖MM(〗〖ZZ(S〗〖HT5”〗〖SX(B〗第34卷〓第3期〖〗2019年6月〖SX)〗[KG0.2mm]〖KG7*3〗〖HT〗〖SX(B〗遥〓感〓技〓术〓与〓应〓用〖〗〖WT5，6〗REMOTE SENSING TECHNOLOGY AND APPLICATION〖SX)〗〓〓〓〓〖KG6*2〗〖WT5”BX〗〖SX(B〗Vol.34〓No.3〖〗Jun.2019〖WT〗〖SX)〗〖ZZ)〗〖MM)〗〖HT〗 〖HT2H〗〖JZ(〗〖WTHZ〗〖STHZ〗 基于Marr小波改进的SIFT算法的遥感影像配准 〖STBZ〗〖WTBZ〗〖HT4K〗 张海涛，金〓燕，刘万军 〖HT5K〗 (辽宁工程技术大学 软件学院，辽宁 葫芦岛〓125105) 〖JZ)〗〖ＨＴ５Ｈ〗〖GK2!2〗摘要〖HTK〗: [KG(0.1mm]针对遥感图像配准方法中错误匹配点对过多、配准效率低和其他性能，提出了一种基于小波的遥感图像配准方法。首先，利用尺度空间理论下的Marr小波对参考图像和待配准图像进行特征提取，然后利用欧氏距离对参考图像和待配准图像的特征点进行初配准，再根据随机采样一致法，对初配准结果进行精配准。为了验证方法的有效性，选择无人机实时航拍图像、不同时相变化遥感图像以及遥感不同高度的遥感图像。实验结果表明：该方法与SIFT(Scale Invariant Feature Transform)算法以及其他改进SIFT算法相比可以有效剔除错误匹配点对，提高了配准精度，同时提高配准效率两倍以上。该方法可以应用于不同遥感数据源，能够有效地提高配准精度，降低配准时间。[KG)] 〖ＨＴＨ〗关〓键〓词〖ＨＴ５Ｋ〗: 遥感图像配准;Marr小波;欧氏距离;随机采样一致法 〖ＨＴＨ〗中图分类号〖HTSS〗:TP79〓〓〖HTH〗文献标志码〖HTSS〗:A〓〓〖HTH〗文章编号〖HTSS〗:1004 0323(2019)03 0622 08 〖HK〗〖HT5SS〗